The act of labeling and identifying of those utilities that are usually situated underground is what is known as utility location. The reason as to why a number of public utilities public utilities run below the surface is either for the purpose of conveniences or because of the temperament of their functions. Labeling and identification of these public utilities should be done before any form of excavation can be carried out. Even with simple activities such as hole-digging, Locating Underground Utilities Edmonton makes sure that safety measures are exercised.
There lies a possibility of destruction of underground utilities in an excavation site. These damages may be disastrous and costly considering the type of utility line. This is due to the reason that damages can bring about unnecessary delays in the project, disruption of services, repair costs, injuries and potential fines from the relevant authorities. To avoid these unwanted disruptions as well as unexpected expenses in Edmonton AB, it necessary to perform utility location checks ahead of any excavation.
A number of utility services are buried below the ground, this includes, fiber optics, telephone lines, waste-water pipes, natural gas, electric grids and many others. Location and detection techniques for utility systems vary from one utility to another depending on the material types carried by the systems. The exact location of a utility can be found by use of different techniques depending on the material nature of the underground utility whose location is to be found.
Utility locating methods can be classified as conventional or nonconventional methods. One conventional technique is the radiolocation technique. This method uses radio waves to locate a utility and is normally used for metal pipes and cables. Electromagnetic equipment are used and are made of a transmitter and a receiver. Once the utility is detected, signals are generated by the transmitter.
If the materials are not detected by the conventional techniques, non-conventional techniques are applied. The non-conventional methods are utilized for concrete materials and plastic pipes. An example of such a technique is the acoustic method of locating. This method employs sound to establish the location of the utility. This method is normally used in tracing non-metal water lines. A transducer normally introduces sound waves in the water line as a acoustic receiver waits for the emitted sound.
Radar that penetrates the ground is another type of nonconventional technique. This method is used to supplement other methods. An image of the subsurface is taken with the help of this method by use of radar pulses. A transmitter, a receiver and a recorder used in profiling are contained in the GPR. Processing of the received signals is done and displayed in a graphical manner. A three-dimensional display of underground utility display is made possible by the use of this technique.
Another form of nonconventional method is the use of magnetic locater which are used in tracing metallic objects that are buried in the ground other than pipes. It is mainly used in the location of substances such as metal tanks, manhole cover which are buried and other huge metal contents. This method shows the comparative amount ferrous-metal buried underground.
Locating underground utilities is very essential. It provides vital information necessary for upcoming plans like mechanical and electrical capacity enhancements, landscaping, road relocation and many more. Architects and engineers obtain crucial information concerning the systems below th ground that is important for the work that they do.
There lies a possibility of destruction of underground utilities in an excavation site. These damages may be disastrous and costly considering the type of utility line. This is due to the reason that damages can bring about unnecessary delays in the project, disruption of services, repair costs, injuries and potential fines from the relevant authorities. To avoid these unwanted disruptions as well as unexpected expenses in Edmonton AB, it necessary to perform utility location checks ahead of any excavation.
A number of utility services are buried below the ground, this includes, fiber optics, telephone lines, waste-water pipes, natural gas, electric grids and many others. Location and detection techniques for utility systems vary from one utility to another depending on the material types carried by the systems. The exact location of a utility can be found by use of different techniques depending on the material nature of the underground utility whose location is to be found.
Utility locating methods can be classified as conventional or nonconventional methods. One conventional technique is the radiolocation technique. This method uses radio waves to locate a utility and is normally used for metal pipes and cables. Electromagnetic equipment are used and are made of a transmitter and a receiver. Once the utility is detected, signals are generated by the transmitter.
If the materials are not detected by the conventional techniques, non-conventional techniques are applied. The non-conventional methods are utilized for concrete materials and plastic pipes. An example of such a technique is the acoustic method of locating. This method employs sound to establish the location of the utility. This method is normally used in tracing non-metal water lines. A transducer normally introduces sound waves in the water line as a acoustic receiver waits for the emitted sound.
Radar that penetrates the ground is another type of nonconventional technique. This method is used to supplement other methods. An image of the subsurface is taken with the help of this method by use of radar pulses. A transmitter, a receiver and a recorder used in profiling are contained in the GPR. Processing of the received signals is done and displayed in a graphical manner. A three-dimensional display of underground utility display is made possible by the use of this technique.
Another form of nonconventional method is the use of magnetic locater which are used in tracing metallic objects that are buried in the ground other than pipes. It is mainly used in the location of substances such as metal tanks, manhole cover which are buried and other huge metal contents. This method shows the comparative amount ferrous-metal buried underground.
Locating underground utilities is very essential. It provides vital information necessary for upcoming plans like mechanical and electrical capacity enhancements, landscaping, road relocation and many more. Architects and engineers obtain crucial information concerning the systems below th ground that is important for the work that they do.
About the Author:
If you are looking for the facts about locating underground utilities Edmonton locals can pay a visit to our web pages online here today. Additional details are available at http://beforeyoudiglocating.com now.
No comments:
Post a Comment