Metal fixtures are beautiful as furniture and even as part of the finishing. Things turn awry when nature starts to take its course. Usually wrought iron and other metal fixtures will have a protective coating. However, sometimes even that is not sufficient. Then one has to find an eco friendly rust remover to clear it before it eats through the metal. Whatever is chosen, stay away from steel wool or any other abrasive material. Use a toothbrush or cloth instead. That way, once the corrosion clears one is not left with scratched up metal.
One can find perfectly effective agents right in the kitchen. Just regular stuff used for everyday home activities like cooking. Salt and lime together are common when there is some tequila resent. The combo can be used again to get rid of corrosion. What you need to do is to simply cover the area with salt. Wet it with the lime juice. Give it a couple of hours. Then use the cut up lime to clear away the gunk.
Lime works because of the citric acid. Anything with citric acid is quite effective. Fresh lemons or fresh lemon juice can be used in this exercise. Note the word fresh. Not any one of those concentrated on supermarket shelves. Cut up the lemon then use the cut end to rub away at the corrosion. One can also spritz with lemon juice and rub with a toothbrush until clean.
Remember that aggressive rubbing can leave scratches on the surface. Aluminum foil is, therefore, a pretty good scrubber. Hard enough to leave it clean. So soft that it does not leave scratches. That is if one is careful not to let the foil develop sharp edges.
Use of aluminum foil does not limit the use of vinegar. One can also use a toothbrush or a piece of cloth. If the fixtures can be removed or are small enough to soak then soak them overnight in the vinegar. The corrosion will have cleared by morning. If the corrosion is extensive one should use distilled white vinegar. This is different from other types as it is a lab-produced cocktail of acetic acid and water. For less potency, just add some water.
Baking soda is another common kitchen ingredient. Just like vinegar, it makes for a very potent cleaning agent. Practically applicable in all sorts of cleaning situations. Cover the affected area with baking soda. Do not use it sparingly. Ensure proper coverage. Wet it with water or vinegar. Do not be afraid of the bubbles if vinegar is used. This is just a normal reaction between bicarbonate and acetic acid in the vinegar. Then scrub.
Cut a potato in half. Soak the cut part in dish soap. Use that end to scrub at the corrosion. It will get soiled. Cut off the soiled part and repeat the exercise. This is yet another easy solution with tools right off the kitchen shelves. So try these before running to the store.
These solutions are mostly meant for smaller patches of corrosion. One can decide to clean a small area every day. Or if the damage is too deep-seated, professional help might be in order.
One can find perfectly effective agents right in the kitchen. Just regular stuff used for everyday home activities like cooking. Salt and lime together are common when there is some tequila resent. The combo can be used again to get rid of corrosion. What you need to do is to simply cover the area with salt. Wet it with the lime juice. Give it a couple of hours. Then use the cut up lime to clear away the gunk.
Lime works because of the citric acid. Anything with citric acid is quite effective. Fresh lemons or fresh lemon juice can be used in this exercise. Note the word fresh. Not any one of those concentrated on supermarket shelves. Cut up the lemon then use the cut end to rub away at the corrosion. One can also spritz with lemon juice and rub with a toothbrush until clean.
Remember that aggressive rubbing can leave scratches on the surface. Aluminum foil is, therefore, a pretty good scrubber. Hard enough to leave it clean. So soft that it does not leave scratches. That is if one is careful not to let the foil develop sharp edges.
Use of aluminum foil does not limit the use of vinegar. One can also use a toothbrush or a piece of cloth. If the fixtures can be removed or are small enough to soak then soak them overnight in the vinegar. The corrosion will have cleared by morning. If the corrosion is extensive one should use distilled white vinegar. This is different from other types as it is a lab-produced cocktail of acetic acid and water. For less potency, just add some water.
Baking soda is another common kitchen ingredient. Just like vinegar, it makes for a very potent cleaning agent. Practically applicable in all sorts of cleaning situations. Cover the affected area with baking soda. Do not use it sparingly. Ensure proper coverage. Wet it with water or vinegar. Do not be afraid of the bubbles if vinegar is used. This is just a normal reaction between bicarbonate and acetic acid in the vinegar. Then scrub.
Cut a potato in half. Soak the cut part in dish soap. Use that end to scrub at the corrosion. It will get soiled. Cut off the soiled part and repeat the exercise. This is yet another easy solution with tools right off the kitchen shelves. So try these before running to the store.
These solutions are mostly meant for smaller patches of corrosion. One can decide to clean a small area every day. Or if the damage is too deep-seated, professional help might be in order.
About the Author:
Discover the best eco friendly rust remover for your projects by visiting our official website now. To check out our client testimonials or to place your order online, click the links at http://www.quick-glo.com today.
No comments:
Post a Comment