Wednesday, June 21, 2017

Factors To Consider Before Custom Fabric Cutting Minneapolis

By Robert Jones


For one to acquire an attractive and desirable fabric material after cutting it, it is essential to prepare how to go about it. The slicing of these materials requires different treatments before slicing to give them a professional look. Specialist in the custom fabric cutting Minneapolis is always available to ensure the appropriate care and treatment are provided. The following are steps that are followed during this process.

Washing and ironing are the first things that an expert should do before slicing material. It is done immediately you purchase your material. The washing is done to avoid messing up with the measurement required if it shrinks. Ironing is done to ensure that wrinkles are gotten rid of; thus, the material is left flat and in its real size.

Cutting of the material is done on a flat hard surface. Avoid placing your fabric on a bed or carpeted floor. It is advisable to use a table that is well balanced. While slicing ensure the materials are well positioned on the table to make sure that there is no hanging side of material. One should be keen on how to place the fabric material, especially if it is slippery.

Using the best type of scissors available in the market gives you the best results you can ever imagine. The scissors should have a large blade that does not become blunt fast. Avoid slicing materials that do not give you ample time to accomplish your goals. Cheap scissors will give you service for a short time; hence, requiring you have some replacement every time. Further, it would be wise if you go for scissors that can be sharpened.

Identification of the straight edge of material is necessary. Try to identify the straight side so as to get a starting point of slicing your material. The selvage edge should give a clear guide that helps the tailor to cut the appropriate sizes and shapes as required. Further, it makes the process as easy as possible.

To square the corners of fabric, one should fit it up the cloth with a square table or even a counter corner. Line up the straight edge that you had formed previously to match it with the brink of the table. After doing so, check if the required measurement of the fabric material is attained. In case there is need to trim your material it should be done right away with sharp scissors.

After acquiring the ninety degrees edges, you can go ahead and measure the size of the square and the triangle you require. Lay the material in front of you and start measuring from the straight edges. Remember to use a ruler that is usually placed directly on the material to make marks to direct you when slicing. Ensure to maintain the margins while conducting the process.

By keenly following the above steps, one can be assured of acquiring an attractive fabric material that you wanted. To check for accuracy, one should fold in half and ensure that the width of both sides is equal. Further, fold it the opposite way and check if the width is same too. Great results are achieved when the above steps are followed keenly without omission of any of them.




About the Author:



No comments:

Post a Comment