If you have spent a considerable amount of money in having someone care for your garden, you certainly do not want to see the mounds that disturb the smooth grassy surface. Most people will think of calling a professional when they see tunnel mounds in their garden. However, the do it yourself procedure on how to trap a mole is very simple and anyone can follow it to get rid of these pests in the garden. You can easily eliminate these pests in your lawn if you follow the steps below.
You need to begin by looking around the garden to see if there is any fresh activity from these pests. Any molehill that has a fresh mound of dirt is a good sign that these pests are active in the garden. Clear the mound of dirt to locate those tunnels that the pests use in moving around. The search for tunnels should extend to fencing structures in the garden because these pests have the habit of digging the tunnels along such structures.
You should proceed to assess if this tunnel is active. To achieve this, you should step on top of the identified tunnel until it collapses. You can leave the collapsed tunnel for a day before coming back to check if the pests have dug out the collapsed dirt. If you notice that the dirt has been dug out, this is a good sign that the mound is active.
The active tunnel needs to be prepared before you set up the traps in it. Gardening tools such as shovels should be used in the preparation process. You can use the pile of dirt to cover the lower section of the identified tunnel to prevent the moles from burrowing below the traps and to allow them to continue burrowing through the tunnels until they get into the traps.
At this point, you can set up the trapping device. There are several kinds of traps out there and they vary in terms of how they capture the animal. You should read the manufacturer instructions in order to figure out how you can set these devices. Once you know how to open and set up these devices, you should place them in the cut out section of the tunnel.
Even after you set up the trap, you need to ensure that it is properly covered up. You can use a large bucket to keep off children and pests from the area. Covering the hole with the bucket will also ensure that there is no light that penetrates into the tunnel. This encourages the pests to continue with the burrowing activity without noticing any change.
You should inspect the traps every day to identify if there are any pests that have been caught. If there is any pest that has been trapped, you should remove it. If you notice that the trapping device has not caught any pest after two days, you should consider moving it to a new area. Traps will in most cases fail if there is a change in the burrowing habits of these pests or if there is too much disturbance on the tunnel.
Trapping a garden pest does not have to be daunting any more. You can rely on the steps mentioned above to help you in getting rid of these pests to ensure that your garden continues to look good.
You need to begin by looking around the garden to see if there is any fresh activity from these pests. Any molehill that has a fresh mound of dirt is a good sign that these pests are active in the garden. Clear the mound of dirt to locate those tunnels that the pests use in moving around. The search for tunnels should extend to fencing structures in the garden because these pests have the habit of digging the tunnels along such structures.
You should proceed to assess if this tunnel is active. To achieve this, you should step on top of the identified tunnel until it collapses. You can leave the collapsed tunnel for a day before coming back to check if the pests have dug out the collapsed dirt. If you notice that the dirt has been dug out, this is a good sign that the mound is active.
The active tunnel needs to be prepared before you set up the traps in it. Gardening tools such as shovels should be used in the preparation process. You can use the pile of dirt to cover the lower section of the identified tunnel to prevent the moles from burrowing below the traps and to allow them to continue burrowing through the tunnels until they get into the traps.
At this point, you can set up the trapping device. There are several kinds of traps out there and they vary in terms of how they capture the animal. You should read the manufacturer instructions in order to figure out how you can set these devices. Once you know how to open and set up these devices, you should place them in the cut out section of the tunnel.
Even after you set up the trap, you need to ensure that it is properly covered up. You can use a large bucket to keep off children and pests from the area. Covering the hole with the bucket will also ensure that there is no light that penetrates into the tunnel. This encourages the pests to continue with the burrowing activity without noticing any change.
You should inspect the traps every day to identify if there are any pests that have been caught. If there is any pest that has been trapped, you should remove it. If you notice that the trapping device has not caught any pest after two days, you should consider moving it to a new area. Traps will in most cases fail if there is a change in the burrowing habits of these pests or if there is too much disturbance on the tunnel.
Trapping a garden pest does not have to be daunting any more. You can rely on the steps mentioned above to help you in getting rid of these pests to ensure that your garden continues to look good.
About the Author:
Learn how to trap a mole using a gopher. To get all the tips and hints, go to our official website at http://www.traplineproducts.com/trapinstructions.html.
No comments:
Post a Comment