Generally, Structural Integrated Panels or simply SIPS refers to panels having some layer of foam insulation enclosed between two oriented strand board layers or alternatively plywood sheaths. Because of the bonded foam to the exterior panels, manufactures achieve a strong products unlike the stick frames. This is why when talking about a SIPS Vs Stick Frame, the SIPs have an upper hand in terms of performance.
The panes essentially offer resistance to rocking and even shear loads together with a capacity of resisting high winds or seismic actions. Unlike sticks, SIP receives more credit for a good structural reliability, temperature control, high insulation features as well as good moisture control. Additionally, reliance on SIP in undertaking a construction project offers more merits than sticks.
These include low costs, lesser possibilities of structural degradation and damages over time as well as a better energy efficiency. Such panels help in saving energy by reducing the loss of heat and reducing air leakage. It is said that they reduce the loss of energy by up to 25% especially when applied on walls and this is even enhanced when they are used in roofing or flooring. Stick frames are however preferred for a low initial installation cost.
In some instances, however, builders have been unfamiliar to the Structural Integrated Panel frames and even decline to use them since they generally require special tools when being installed. In addition, a sufficient lead time remains a requirement in a bid to accommodate aspects such as special engineering, shipping, approval of codes and manufacture. This is however taken care of by some manufacturers through the provision of drawings and engineering services that assist in facilitating the approval and installation processes.
Structurally integrated panes come from the factory as finished and assembled product before its delivery to a construction site. This is nevertheless not the case with stick frames that in many occasions will require assembling at the construction site. This, therefore, gives a builder an easier time in handling the panels. Stick-built structures, on the other hand, need places requirements for continuous foundations thus their installation is very restrictive and also labor-intensive.
On their lifecycle, structurally integrated panels can last 50 or more years. Their air tight property eliminates the likelihood of accumulation of molds. These panels additionally eliminate the need to use studs whenever they are installed on walls. However, any moisture getting into its panels will cause damages.
Nevertheless, these materials both share a common disadvantage. Constructions made using SIPS or stick frames are susceptible destruction by insects and rodents. As such, it is always necessary to apply some insecticides to these materials as they are used in construction. One as well needs to ensure that the level of humidity is below 50% to keep away these insects and rodents.
It also remains crucial that before and after construction, the surrounding areas are treated using insecticides. This offers assistance in reducing the chances rodent or insect invasion. On the other hand, if there are dangers of fires, gypsum or concrete sidings can be applied onto the exterior sections of these materials to eliminate any chances of such risks.
The panes essentially offer resistance to rocking and even shear loads together with a capacity of resisting high winds or seismic actions. Unlike sticks, SIP receives more credit for a good structural reliability, temperature control, high insulation features as well as good moisture control. Additionally, reliance on SIP in undertaking a construction project offers more merits than sticks.
These include low costs, lesser possibilities of structural degradation and damages over time as well as a better energy efficiency. Such panels help in saving energy by reducing the loss of heat and reducing air leakage. It is said that they reduce the loss of energy by up to 25% especially when applied on walls and this is even enhanced when they are used in roofing or flooring. Stick frames are however preferred for a low initial installation cost.
In some instances, however, builders have been unfamiliar to the Structural Integrated Panel frames and even decline to use them since they generally require special tools when being installed. In addition, a sufficient lead time remains a requirement in a bid to accommodate aspects such as special engineering, shipping, approval of codes and manufacture. This is however taken care of by some manufacturers through the provision of drawings and engineering services that assist in facilitating the approval and installation processes.
Structurally integrated panes come from the factory as finished and assembled product before its delivery to a construction site. This is nevertheless not the case with stick frames that in many occasions will require assembling at the construction site. This, therefore, gives a builder an easier time in handling the panels. Stick-built structures, on the other hand, need places requirements for continuous foundations thus their installation is very restrictive and also labor-intensive.
On their lifecycle, structurally integrated panels can last 50 or more years. Their air tight property eliminates the likelihood of accumulation of molds. These panels additionally eliminate the need to use studs whenever they are installed on walls. However, any moisture getting into its panels will cause damages.
Nevertheless, these materials both share a common disadvantage. Constructions made using SIPS or stick frames are susceptible destruction by insects and rodents. As such, it is always necessary to apply some insecticides to these materials as they are used in construction. One as well needs to ensure that the level of humidity is below 50% to keep away these insects and rodents.
It also remains crucial that before and after construction, the surrounding areas are treated using insecticides. This offers assistance in reducing the chances rodent or insect invasion. On the other hand, if there are dangers of fires, gypsum or concrete sidings can be applied onto the exterior sections of these materials to eliminate any chances of such risks.
About the Author:
Our informative website makes a comparison between SIPS Vs stick frame as insulated panels. To know more, visit the main page here at http://www.extremepanel.com/sipsvssticks.
No comments:
Post a Comment