Recycling all things old is the way to go. It's good for the environment, and it's often a great way to save money. For example, restoring old furnishings is a great way to decorate a home without spending a lot of money. There is no reason to send older pieces of furniture to the landfill when it can grace any home. However, it requires quality furniture stripping and refinishing to make this possible.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
People like to tackle such projects themselves, especially of late, in this do-it-yourself world. Certainly, it's not a problem when it's just a matter of salvaging a common piece, but it is a problem if it's a valuable one. A valuable antique, for instance, should go directly to the professionals, and should not be refinished by any inexperienced individual.
Of course, this work, being so intricate and detailed, and requires so much skill is costly. There are many factors that affect the cost, such as the geographical location, the damage of the item, and so on. Others who really want to take on such a task, can do so with just common pieces of old furniture.
Before deciding to tackle such a project, one must understand that there is lots of commitment involved. There's a lot of work that goes into refinishing a wooden piece. Firstly, it starts with investigating the type of wood, as well as the type of finish. There are different products and ways of removing a finish, depending on the type that it is.
For example, in some cases the finish can be removed with a heat gun. Others might require the use of a liquid application with a paintbrush, that's later scraped off, along with the finish. Next, it's necessary to sand the surfaces, even those bitty intricate details that are hard to reach.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
One thing is for sure, and that's that of refinished piece of furniture can breathe new life into an entire home. Also, it can be a project that one can be proud of, either because the piece was salvaged, or because it was completed by the individual. One way or the other, this new item can look fabulous in any home.
The key word is quality stripping. If it's not done right from the get go, there will only be problems in the refinishing stay each. Such problems would be obvious to the naked eye, making the piece look less than favorable. Therefore, it takes the steady hands and good skills, as well as top-of-the-line products that can actually bring such great results.
People like to tackle such projects themselves, especially of late, in this do-it-yourself world. Certainly, it's not a problem when it's just a matter of salvaging a common piece, but it is a problem if it's a valuable one. A valuable antique, for instance, should go directly to the professionals, and should not be refinished by any inexperienced individual.
Of course, this work, being so intricate and detailed, and requires so much skill is costly. There are many factors that affect the cost, such as the geographical location, the damage of the item, and so on. Others who really want to take on such a task, can do so with just common pieces of old furniture.
Before deciding to tackle such a project, one must understand that there is lots of commitment involved. There's a lot of work that goes into refinishing a wooden piece. Firstly, it starts with investigating the type of wood, as well as the type of finish. There are different products and ways of removing a finish, depending on the type that it is.
For example, in some cases the finish can be removed with a heat gun. Others might require the use of a liquid application with a paintbrush, that's later scraped off, along with the finish. Next, it's necessary to sand the surfaces, even those bitty intricate details that are hard to reach.
After all the sanding is completed, then the surface is to be wiped clean with a tack cloth. This is meant to reduce any dust that could affect the end results. The next step involves painting were staining the piece. There are a few other steps involved, and this is just an introduction to demonstrate the amount of elbow grease required to successfully complete such a project.
One thing is for sure, and that's that of refinished piece of furniture can breathe new life into an entire home. Also, it can be a project that one can be proud of, either because the piece was salvaged, or because it was completed by the individual. One way or the other, this new item can look fabulous in any home.
About the Author:
Read more about New Treasures Discovered From Quality Furniture Stripping And Refinishing.
No comments:
Post a Comment