Wednesday, July 19, 2017

What You Need To Know About Sectional Flights

By Arthur Butler


The most important part of a construction project is the foundation. The foundation must be properly laid in order to make it stand firm. If the foundation is not strong enough the building most probably will topple in the future. Most contractors use piles to strengthen building foundations. The best way to install these piles is through sectional flights since they give the users the flexibility they require when undertaking such works. Continue reading if you want to find more about these flighting systems.

When making spirals for a flighting system ensure that they have the same inside diameter and outside diameter. The importance of this in a helix flighting system cannot be overruled. Having the same diameter enables the spirals to be easily mounted on the driving shaft and also ensures that they are stable. The spirals are also supposed to be distributed systematically on the to achieve the right configuration for the machine to work.

The other thing about these spiral flighting systems that they can be used on any ground. Grounds are different, there are some that are not stable while others are. They can also be used on unbarred grounds settings like made up surfaces and areas where water levels are a bit higher. Water levels determine the working weight to be used.

Helix system has the capability of handling piles with diameters ranging from two hundred to four hundred and fifty millimeters. This makes it suitable for installing bulky piles especially in sites with limited access. The system is also suitable for installing holding walls and basement fitting since it can reach a depth of twelve meters.

You need not to worry about noise or vibrations when you are using helix flighting system. The spirals are very effective and produce fewer vibrations when working as compared to helicoid system. The vibrations produced are also less destructive since they are not of high magnitude. Thus, the system can be used in between buildings and in residential areas without causing any damages.

Helix flighting systems are very expensive but they are worth every penny you spend on them. The spirals are made of good materials and can be tailor made to your specifications. They are easily adjustable to suit whatever needs you may have. When you procure these systems be ready to use for a life time.

You can design your spirals any way you want. However, there are only way to of achieving the designs you want. The original way was the craftsmans black cut and the modern cut designer software. The latter is the most recent and almost every company is shifting towards it. Both methods have their pros and cons thus it is better you evaluate them first before deciding.

Irrespective of the method you use ensure that all the other details are correct for the helix system to work. Use the internet to research further about auger flighting systems and how you can make them more efficient. Also, if you are reluctant about buying spirals you can look for metal plates and cut those spirals yourself.




About the Author:



No comments:

Post a Comment