The landscape determines how good the golf field is while the green attract most of the players during the game, because of this proper care than in trees, fairways and other parts. The arena condition effect the success of the golf facilities. To make all these possible the field is maintained using water, most specifically in dry and hot months when plants dries out because they lose more water during respiration. For maintenance of plants in good condition golf course irrigation takes place.
The system for watering should be designed to be effective in distributing water uniformly, protect and conserve water resources. The design should be able to meet this entire requirement. The site specific characteristics for example type of soil should be included in the design.
When irrigating factors like turf species, type of soil, and irrigation areas should be considered. The type of soil outline the water amount to be applied to replace water lost through leaves from roots. Site factors including sun, degree, of shade, slopes and hills shows the water to be used. Windy areas lead to increase in transpiration rate thus large volume of water is required by the plants to replace one lost.
The methods used in for watering differ depending on the type of plant and area of to be watered. The methods are piping and sprinkler methods. The system must provide large amount of water after a short period but must not be beyond the soils infiltration rates which can result to runoff. The procedure must be efficient and effective for using water.
The head method of sprinkling lead to areas closest to the head than areas out and this can result to a run off. To remedy this double row systems are used or manual watering of areas which has not been watered that is the fairway and into extended rough. There are designs available which have multiple nozzles that is front and back. They provide flexibility and improve distribution uniformly.
Sprinklers are not used in green and they are set uniformly 70 feet to 74 feet for equal sprinkling. This makes the fluid to be equally distributed on the ground. To determine all this computers can be used where they give right spacing and fluid distribution.
The watering system must in right working condition. To make sure this is happening auditing process is carried out to ensure proper working of the system with cost effectiveness. Performance can be evaluated using these procedures: scheduling coefficient, coefficient of uniformity and distribution uniform of the lowest quartile. Auditors carry out the process.
When choosing equipment for irrigation for example sprinklers one must know the amount of water it carries and pressure it have. Pressure of 65psi to 80psi is suitable for use. The amount of water a sprinkler delivers is indicated in the manufacturing instructions with the radius of throw. The next step is to determine how to control the equipment to deliver adequate water amounts as they are required.
The system for watering should be designed to be effective in distributing water uniformly, protect and conserve water resources. The design should be able to meet this entire requirement. The site specific characteristics for example type of soil should be included in the design.
When irrigating factors like turf species, type of soil, and irrigation areas should be considered. The type of soil outline the water amount to be applied to replace water lost through leaves from roots. Site factors including sun, degree, of shade, slopes and hills shows the water to be used. Windy areas lead to increase in transpiration rate thus large volume of water is required by the plants to replace one lost.
The methods used in for watering differ depending on the type of plant and area of to be watered. The methods are piping and sprinkler methods. The system must provide large amount of water after a short period but must not be beyond the soils infiltration rates which can result to runoff. The procedure must be efficient and effective for using water.
The head method of sprinkling lead to areas closest to the head than areas out and this can result to a run off. To remedy this double row systems are used or manual watering of areas which has not been watered that is the fairway and into extended rough. There are designs available which have multiple nozzles that is front and back. They provide flexibility and improve distribution uniformly.
Sprinklers are not used in green and they are set uniformly 70 feet to 74 feet for equal sprinkling. This makes the fluid to be equally distributed on the ground. To determine all this computers can be used where they give right spacing and fluid distribution.
The watering system must in right working condition. To make sure this is happening auditing process is carried out to ensure proper working of the system with cost effectiveness. Performance can be evaluated using these procedures: scheduling coefficient, coefficient of uniformity and distribution uniform of the lowest quartile. Auditors carry out the process.
When choosing equipment for irrigation for example sprinklers one must know the amount of water it carries and pressure it have. Pressure of 65psi to 80psi is suitable for use. The amount of water a sprinkler delivers is indicated in the manufacturing instructions with the radius of throw. The next step is to determine how to control the equipment to deliver adequate water amounts as they are required.
About the Author:
You can get a brief summary of the things to consider before choosing a provider of golf course irrigation services at http://www.oandjgolf1.com/services now.
No comments:
Post a Comment